Door wings are made in the implementation of spruce, oak, pine, okoume, larch and
possibly other tree species. Dimensions according to submitted draft (made to measure,
plus minus 1 mm), door wings cases are 16 cm wide around the perimeter of the frame.
In the door wing there are vertical door beams of special hardened reinforcement
against bending on both sides, the inside is filled Pir foam without thermal bridges.
Heat permeability is 0,80W/m2K for thickness 58mm. There is waterproof plywood on
the surface specially built for exterior with high quality veneer top.
We offer professional consultation, the possibility of production immediately and
delivery within 48 hours to you after order confirmation.
Door leaves are appropriate if the door is made on smoothly, it can be milled to
plywood to a depth of max. 4.5 mm.
Composition of the door leaf STANDARD:
9mm waterproof plywood on both sides,
Pir foam
By default we are doing door wings with a thickness: Euro 68, Euro 78, Euro 88, Euro
92, Euro 102
But if you need other thickness, we can produce it. If you wish another composition
of door inner, we can adapt it.